Purple Scroll Lace Border

About This Design

This scroll lace border design stitches out at 225.0 × 35.8 mm (8.9 × 1.4 in) and uses 6 thread colors across 5 color changes. Total count is 6,723 stitches at a density of about 83.5 stitches/cm².

At The Machine

• Estimated stitch-out time: ~11 minutes at 600 spm
• Color changes: 5, automatic trims: 10
• Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.

Fabric & Hooping

At about 83.5 stitches/cm² the fill is moderate: one layer of medium-weight cut-away handles most wovens, while knits want a second layer or a fusible backing. At 225.0 × 35.8 mm plan on 6×10 in or larger, and mark your centre lines before hooping.

Thread Colors in This Design

DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:

• 472 Ultra Light Avocado
• 958 Dark Sea Green
• 3746 Dark Blue Violet
• 434 Light Brown
• 321 Red
• 900 Dark Burnt Orange

Stitching Notes

With 6 colors and 5 changes you can pre-wind the whole set before you start and never leave the machine. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.

What to Make With It

A border repeats well along table runners, pillowcase edges, curtain hems and quilt sashing. Stitch one repeat on scrap and measure it, then work out how many repeats your piece needs before you hoop the real fabric.