Lace Collar Yoke
Lace Collar Yoke is a free machine embroidery design digitized at 354.3 × 240.3 mm with 15,974 stitches in 2 thread colors. Expect roughly 27 minutes of stitch-out time on a home machine. Download it below in DST format, ready to transfer to your machine.
Download Files
Free for personal stitching. Need another format (DST, JEF, EXP…)? More formats are on the way. Design License →
Stitching Color Sequence
Thread order as programmed in the file — follow along at your machine. This file format doesn't store thread colors — the colors shown are a suggested palette. Swap in any threads you like.
| # | Thread | Stitches |
|---|---|---|
| 1 | 3716 · Very Light Dusty Rose | 79 |
| 2 | 815 · Medium Garnet | 15,845 |
About This Design
This lace collar design stitches out at 354.3 × 240.3 mm (13.9 × 9.5 in) and uses 2 thread colors across 1 color change. Total count is 15,974 stitches at a density of about 18.8 stitches/cm².
At The Machine
- Estimated stitch-out time: ~27 minutes at 600 spm
- Color changes: 1
- Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.
Fabric & Hooping
At about 18.8 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 354.3 × 240.3 mm this needs a large-format hoop, or splitting across several hoopings with alignment marks — check it against your machine's maximum field first.
Thread Colors in This Design
DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:
- 3716 Very Light Dusty Rose
- 815 Medium Garnet
Stitching Notes
With 2 colors and 1 changes you can pre-wind the whole set before you start and never leave the machine. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.
What to Make With It
A border repeats well along table runners, pillowcase edges, curtain hems and quilt sashing. Stitch one repeat on scrap and measure it, then work out how many repeats your piece needs before you hoop the real fabric.