Green Bear with Crabs

About This Design

This green bear with crabs design stitches out at 208.1 × 53.3 mm (8.2 × 2.1 in) and uses 7 thread colors across 6 color changes. Total count is 3,883 stitches at a density of about 35.0 stitches/cm².

At The Machine

• Estimated stitch-out time: ~6 minutes at 600 spm
• Color changes: 6, automatic trims: 12
• Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.

Fabric & Hooping

At about 35.0 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 208.1 × 53.3 mm plan on 6×10 in or larger, and mark your centre lines before hooping.

Thread Colors in This Design

DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:

• 415 Pearl Gray
• 815 Medium Garnet
• 3716 Very Light Dusty Rose
• 743 Medium Yellow
• 702 Kelly Green
• 958 Dark Sea Green
• 820 Very Dark Royal Blue

Stitching Notes

7 colors across 6 changes makes this a real thread-management job: lay the spools out in sequence order first and keep the color chart to hand. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.

What to Make With It

A picture-style design wants a flat, stable surface where it can be seen whole: a framed hoop piece, a quilt centre, a cushion front or the back of a jacket. Avoid stretchy garments, which distort the shape.