Choco Chip Splash Bear

About This Design

This bear design stitches out at 227.5 × 230.0 mm (9.0 × 9.1 in) and uses 6 thread colors across 5 color changes. Total count is 8,464 stitches at a density of about 16.2 stitches/cm².

At The Machine

• Estimated stitch-out time: ~14 minutes at 600 spm
• Color changes: 5, automatic trims: 6
• Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.

Fabric & Hooping

At about 16.2 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 227.5 × 230.0 mm plan on 6×10 in or larger, and mark your centre lines before hooping.

Thread Colors in This Design

DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:

• 472 Ultra Light Avocado
• 444 Dark Lemon
• 743 Medium Yellow
• 741 Medium Tangerine
• 721 Medium Orange Spice
• 900 Dark Burnt Orange

Stitching Notes

With 6 colors and 5 changes you can pre-wind the whole set before you start and never leave the machine. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.

What to Make With It

A picture-style design wants a flat, stable surface where it can be seen whole: a framed hoop piece, a quilt centre, a cushion front or the back of a jacket. Avoid stretchy garments, which distort the shape.