Cartoon Bear with Bow

About This Design

This bear design stitches out at 85.4 × 137.9 mm (3.4 × 5.4 in) and uses 6 thread colors across 6 color changes. Total count is 6,054 stitches at a density of about 51.4 stitches/cm².

At The Machine

• Estimated stitch-out time: ~10 minutes at 600 spm
• Color changes: 6, automatic trims: 14
• Follow the color sequence table above — thread numbers refer to the chart programmed in the file; match them to your brand by color.

Fabric & Hooping

At about 51.4 stitches/cm² this is an open, low-density fill, so it sits happily on quilting cotton, linen or lightweight shirting with a single layer of tear-away behind it. At 85.4 × 137.9 mm reach for a 5×7 in hoop.

Thread Colors in This Design

DST files store stitch data but no thread information, so the colors below are our suggested DMC match. Swap in whatever you have in a similar shade:

• 798 Dark Delft Blue
• 776 Medium Pink
• 3746 Dark Blue Violet
• 721 Medium Orange Spice
• 3607 Light Plum
• 444 Dark Lemon

Stitching Notes

With 6 colors and 6 changes you can pre-wind the whole set before you start and never leave the machine. DST stores stitch data only, which is why the color list is a suggestion rather than the digitizer's original choice.

What to Make With It

A picture-style design wants a flat, stable surface where it can be seen whole: a framed hoop piece, a quilt centre, a cushion front or the back of a jacket. Avoid stretchy garments, which distort the shape.